Prochoice Disposable dust masks P2 Valve +Carbon
Description
- P2: Certified to AS/NZS 1716:2012 Respiratory Protective Devices
- P2 activated carbon disposable respirator for protection against nuisance level organic vapours, mechanically and thermally generated particles
- Lightweight cupped design for comfortable extended wear
- Dual Quicklock head strap for ease of donning and doffing
- ProValve exhalation valve for decreased breathing resistance and heat stress
- Nose flange for increased protection and facial fit
- Resealable bag for hygienic storage
- Qty/Box - 12
- Qty/Carton - 20 Boxes
PRODUCT DETAILS Straps: Filter Media: Weight: Nose Flange: Latex-Free Rubber Polypropylene Melt-blown 15g +- 5g each PU Foam
CARE INSTRUCTIONS Shelf life of the unopened product is three (3) years from date of manufacture when stored within the temperature range of -5°C to +50°C and less than 80% relative humidity. End of shelf life date is marked on the product packaging. Before initial use, always check that the product is within the stated shelf life. When storing or transporting this product use original packaging provided. Ensure disposable mask is correctly fitted prior to each use and conduct annual fit testing in accordance with AS/NZS 1715:2009.
WARNINGS AND USE LIMITATIONS
- Facial hair has the potential to compromise the required protective seal of the respirator- Ensure adequate oxygen levels are present- Ensure the contamination is known and the respirator is suitable for the application- Replace when taste, smell or the breathing resistance is high- Store in a clean, resealable storage device
STANDARDS CERTIFIED TO: AS/NZS 1716:2012 Respiratory Protective Devices Certified by Benchmark Identification number: BMP547903 AS/NZS 1716:2012 ID No: BMP547903 To be used in conjunction with: AS/NZS 1715:2009 Selection, Use and Maintenance of Respiratory Protective Equipment CLASSIFICATION P1 P2 P3 EFFICIENCY 80% (Particles to 1μm micron = 0.001mm size) 94% (particles to 0.3μm micron = 0.0003mm size) 99.95% (particles to <0.3μm micron = less than 0.0003mm size) EXAMPLE OF CONTAMINANTS/USES Dust Toxic dusts including asbestos, welding fumes Toxic dusts including asbestos, welding fumes, full face and powered air performance at P3 only.
Specifications
- Sales UOM Pack Qty
- 1
- Pallet Qty
- 120
- Pack
- 12
- Brand Name
- Prochoice
- Country of Manufacture
- Australia
- Product Range
- Hardware & Accessories
- Category
- Personal Protective Equipment
- Sub Category
- Face Masks
Prochoice Disposable dust masks P2 Valve +Carbon
Specifications
- Sales UOM Pack Qty
- 1
- Pallet Qty
- 120
- Pack
- 12
- Brand Name
- Prochoice
- Country of Manufacture
- Australia
- Product Range
- Hardware & Accessories
- Category
- Personal Protective Equipment
- Sub Category
- Face Masks
Description
- P2: Certified to AS/NZS 1716:2012 Respiratory Protective Devices
- P2 activated carbon disposable respirator for protection against nuisance level organic vapours, mechanically and thermally generated particles
- Lightweight cupped design for comfortable extended wear
- Dual Quicklock head strap for ease of donning and doffing
- ProValve exhalation valve for decreased breathing resistance and heat stress
- Nose flange for increased protection and facial fit
- Resealable bag for hygienic storage
- Qty/Box - 12
- Qty/Carton - 20 Boxes
PRODUCT DETAILS Straps: Filter Media: Weight: Nose Flange: Latex-Free Rubber Polypropylene Melt-blown 15g +- 5g each PU Foam
CARE INSTRUCTIONS Shelf life of the unopened product is three (3) years from date of manufacture when stored within the temperature range of -5°C to +50°C and less than 80% relative humidity. End of shelf life date is marked on the product packaging. Before initial use, always check that the product is within the stated shelf life. When storing or transporting this product use original packaging provided. Ensure disposable mask is correctly fitted prior to each use and conduct annual fit testing in accordance with AS/NZS 1715:2009.
WARNINGS AND USE LIMITATIONS
- Facial hair has the potential to compromise the required protective seal of the respirator- Ensure adequate oxygen levels are present- Ensure the contamination is known and the respirator is suitable for the application- Replace when taste, smell or the breathing resistance is high- Store in a clean, resealable storage device
STANDARDS CERTIFIED TO: AS/NZS 1716:2012 Respiratory Protective Devices Certified by Benchmark Identification number: BMP547903 AS/NZS 1716:2012 ID No: BMP547903 To be used in conjunction with: AS/NZS 1715:2009 Selection, Use and Maintenance of Respiratory Protective Equipment CLASSIFICATION P1 P2 P3 EFFICIENCY 80% (Particles to 1μm micron = 0.001mm size) 94% (particles to 0.3μm micron = 0.0003mm size) 99.95% (particles to <0.3μm micron = less than 0.0003mm size) EXAMPLE OF CONTAMINANTS/USES Dust Toxic dusts including asbestos, welding fumes Toxic dusts including asbestos, welding fumes, full face and powered air performance at P3 only.